A swimming pool can last for 25 years or more, depending on how well it is maintained. It provides a lot of fun, but it can also be a source of stress. Pool problems vary in size and severity, but even minor issues can be aggravating.

Most inground pool problems are caused by leaking air and water from a pipe or pump. As you hear leaking air or see water coming out of areas it shouldn’t, you should either fix it yourself or contact a professional pool repair company immediately because ignoring the situation will worsen and cost you a lot more money.

Here are some of the most frequent problems you’ll encounter as a pool owner.

6 Most Common Inground Pool Repairs

Dirty Filters

A filthy filter is one of the simplest problems to detect since your pool seems swampy given the fact that you’re backwashing it more frequently. At best, you should merely clean your filter or contact a professional pool cleaner to do the job.

Leaking Pool Pumps

Given the massive pressure that your pool pump runs under, a leak might occur from a worn pump lid, the drain stopper, or the pipes pushing water out of the pump.

With the sun beating down on it, the huge pressure and the amount of powerful chemicals running through the system, the equipment can break down and create cracks more quickly. Water leaking down the bottom of the seal plate might indicate a blown shaft seal.

Clogged Pump

Clogs become more severe in spring when plants begin to bloom and shed seeds, and tiny debris such as animal hair and pine needles leaves fall into your swimming pool. This waste might collect in the impeller vanes if the pump basket has cracks or is placed incorrectly.

Skimmer Leaks

Always check the skimmer first if you suspect a leak in your pool. The skimmer in a concrete pool might detach from the framework. Skimmer leaks in vinyl pools can be caused by a worn-out, improperly fitted, or defective skimmer gasket.

Freezing temperatures might develop fractures in the skimmer and cause it to malfunction. Unless you let these problems go, they may rapidly become a big repair job.

Melted Pump Fitting

If your pump fails, it might create so much heat that the threads melt, leak, and shrink. Unfortunately, you can’t fix it with pool putty or Teflon tape because this is a pressure leak.

The only solution is to cut it out and replace it with a heat-resistant fitting to avoid the problem from recurring in the future.

Air in Pump Basket

There are several ways for air to enter your pump, including an O-ring that is filthy or just loose or a poorly sealed pump lid. If the suction part before the impeller is leaking, your pump might draw air in.

Cleaning the O-ring with Teflon lube and simply tightening the lid does the work sometimes. It can become more serious when air enters the pump through the threads on the fitting at the front, causing it to run dry.

Trust the Experts in Pool Maintenance

The pool repair specialists at City Wide Pool Service may handle all of your pool repair needs. If you have a pool problem and reside in the Las Vegas area, please contact us immediately. Make an appointment for excellent repairs and get back to having fun in the sun.