About 69% of American households conduct spring cleaning every year. While most homeowners prioritize indoor living spaces like kitchens and bathrooms, spring is also the perfect time to clean your pool.
Even if you didn’t use your pool during the winter, there are still some things that need to be done before you can start swimming again. Here is a checklist of seven items that you or your trusted pool cleaning service in Las Vegas should take care of before putting your pool back into use.
Step 1: Clean the pool deck and furniture
One of the most important things you need to do before using your pool is clean the surrounding area. That includes the deck, furniture, and anything else in the area.
Make sure to sweep away any leaves or debris and give everything a good scrubbing. Not only will this make your pool look nicer, but it will also help keep it clean and safe for swimming.
Step 2: Clear the water of any debris
Debris can clog up your pool filter and make it challenging to clean the water. Use a skimmer net to remove any leaves, twigs, or other debris from the surface of the water. You can also use a pool vacuum to get rid of dirt or sand that settled at the bottom of the pool.
Step 3: Clean the pool filter
The pool filter is one of the essential parts of the pool maintenance process. It’s responsible for removing debris and contaminants from the water, so it’s necessary to clean it regularly. Whether you use a DE filter or a cartridge filter now is a good time to clean those filters or grids. If you happen to have a sand filter make sure to inspect the sand for deficits or clumps.
Step 4: Flush the pool lines
If your pool has been unused for a while, it’s essential to flush the lines before using it. That will remove any dirt or debris accumulated in the pipes. To wash the cables, turn on all the faucets in the house and let the water run for a few minutes.
Step 5: Check the water level and pH balance
Before doing anything else, it’s essential to check your pool’s water level and pH balance. The water level should be at least two inches below the top of the skimmer weir box, and the pH should be between 7.2 and 7.8.
If the water level is too high or the pH is off, take steps to correct it before continuing.
Step 6: Test for chlorine levels
Chlorine is essential for keeping your pool clean and safe, so it’s vital to test its levels regularly. The ideal chlorine level is 1-3 parts per million (ppm). If the chlorine level is too low, add liquid chlorine to the water. If it’s too high, you’ll need to dilute it with water.
Step 7: Balance the alkalinity levels
Alkalinity is a measure of the buffering ability of the pool water. If the alkalinity levels are too high, it can be challenging to maintain the pH balance of the pool. You can adjust the alkalinity levels by adding baking soda or muriatic acid to the pool filter.
You Can Always Rely On A Professional
Spring is the time to give your pool some much-needed attention. By following this checklist, you can ensure that your pool is ready for summer swimming. If that proves too much for you, or you simply have no time to care for your pool, you can always rely on a professional to help you.
City Wide Pool Service offers reliable pool maintenance services that include cleaning and ensuring your equipment is in top condition. If you’re interested in our services, get in touch with us today, and our team will be happy to help you.